Traffic Lights

Telecom

Speed Cameras

Surveillance

Light Poles

IP 65 – Dust & Waterproof

RT Series IP65 Outdoor Cabinet is a high-quality cabinet designed for outdoor industrial applications. Based on EN60529 provided IP65

protection class against dust and water ingress. Welded construction for strength and corrosion protection, all metalwork is pre-galvanized high corrosion resistance, painted externally with RAL 7035 Polyester Outdoor antigraffiti paint.

Complete protection for the enclosed equipment from dust and other materials such as dirt, oils and non-corrosives.. Protection from voltage and moving parts for people who come in contact with the enclosure. A high level of protection from water, including powerful jet sprays used during washdown.

High Reliability

Tested and designed with robust components and materials, the RT outdoor UPS assures reliable operation and a long service life in stressful environments. It is a true on-line industrial UPS. The batteries used inside the UPS were specifically selected due to their wide operational range of -40°C to 80°C. With a sun protection, heat insulation, roof ventilation .With waterproof and the filtration dust inlet; the cabinet front door shutters with waterproof design, on the back of welding water tank, water tank installed above the net with quick release feature of the dust.

Lightning & Surge Protection

RT Series Outdoor UPS minimizes the potential for power issues with your IT /Medical/Industrial Equipment, especially in the aftermath of a lightning and surges. Because rectifiers, inverters, switches and other electronic UPS components can be highly susceptible to overvoltage transients, surge protection is necessary at UPS inputs and outputs to protect the components from transient overvoltages produced by upstream and downstream sources.

The UPS contain transient susceptible electronic control circuitry that determines if the UPS should be delivering power from the DC-AC converter (batteries) or from the secondary AC source (utility power). Additionally, when in bypass mode due to maintenance or failure, the sensitive loads should be protected with a surge suppression device from transient disruption, degradation, or damage from transient appearing on the secondary AC source or utility power

Generator Compatible

RT Series ensures complete synchronization with any generator connected to it. It is critical in the applications to achieve a tight control engine speed, as it is what allows the synchronization between the UPS system and the back-up generator.

Usually, when a mains failure is detected, there is an inevitable time delay before the backup generator can be started up and synchronized. The UPS system covers this by powering the critical load from its battery, then switching to generator power when available. It also uses backup generator power to recharge the depleted battery. Similarly, the UPS system uses battery power to maintain an uninterrupted power supply during transfer back to mains, then uses the mains power to recharge its batteries again.

Network Management